Drive Modules

  • Weighted Take-Up Drive Module
    Weighted Take-Up Drive Module
  • FlexMove Catenary Drive Module
    FlexMove Catenary Drive Module

Direct Catenary Drive Module
  • Lengths:
    • Minimum = 481mm (1.58ft)
    • Maximum = 25 m (95 ft)
    • Minimum tail only (knuckle modules, and plain bend corner) = 329 mm (1.08 ft) (contact factory)
  • Drive Sprocket:
    • 65 mm = 16 tooth
    • 105 mm and 150 mm = 12 tooth
  • Pitch Diameter:
    • 45 & 65 mm = 129 mm (5.093 in)
    • 85, 180 & 260 mm = 128 mm (5.038 in) 
    • 105 mm and 150 mm = 136 mm (5.336 in)
    • Maximum incline or decline = 7°
  • 3/4” and 20 mm Drive Shafts available
  • Uses catenary loop for belt take-up
  • Side mount sealed gearmotors can be in position 1, 2 or 3
  • Optional 20mm diameter x 1.5 in long dual output shaft for common driven conveyors
Direct Guided Profile Drive Module
  • For use with gravity takeup or fully contained chain
  • Lengths:
    • Minimum = 481mm (1.58ft)
    • Maximum = 25 m (95 ft)
    • Minimum tail only (knuckle modules, and plain bend corner) = 329 mm (1.08 ft) (contact factory)
  • Drive Sprocket:
    • 65 mm = 16 tooth
    • 105 mm and 150 mm = 12 tooth
  • Pitch Diameter:
    • 45 & 65 mm = 129 mm (5.093 in)
    • 85, 180 & 260 mm = 128 mm (5.038 in) 
    • 105 mm and 150 mm = 136 mm (5.336 in)
      Maximum incline or decline = 7°
  • 3/4” and 20 mm Drive Shafts available
  • Side mount sealed gearmotors can be in position 1, 2 or 3
  • Optional 20mm diameter x 1.5 in long dual output shaft for common driven conveyors
  • Optional power transfer available for small part in-line transfer applications
Suspended Drive 
  • Lengths:
    • Minimum = 481mm (1.58ft)
    • Maximum = 25 m (95 ft)
    • Minimum tail only (knuckle modules, and plain bend corner) = 329 mm (1.08 ft) (contact factory)
  • Drive Sprocket:
    • 65 mm = 16 tooth
    • 105 mm and 150 mm = 12 tooth
  • Pitch Diameter:
    • 45 & 65 mm = 129 mm (5.093 in)
    • 85, 180 & 260 mm = 128 mm (5.038 in) 
    • 105 mm and 150 mm = 136 mm (5.336 in)
      Maximum incline or decline = 7°
  • 3/4” and 20 mm Drive Shafts available
  • Uses catenary loop for belt take-up
  • Optional 20mm diameter x 1.5 in long dual output shaft for common driven conveyors
Weighted Take-Up Module
  • Provides compact tail for in machine applications
  • Lengths:Minimum = 700 mm (27.56 in)
  • Uses weighted idler roller and sight gauge for belt take-up
  • Take-up module should be located within 2 m (78 in) of discharge end

Please see Engineering Manual for more information

Manuals & Literature

Engineering ManualsPagesFile Size
Engineering Manual23252 MB

 

LiteraturePagesFile Size
Brochure63.59 MB