Support Stands

Fixed Height Support Stands


Fixed Height Support Stand

  • Legs include 2 t-slots per side for accessory mounting
  • Provides 4″ (102mm) of height adjustment
  • Stand Widths: 12″ – 48″ (305mm – 1219mm)
  • Stand Heights: 15″ – 99″ (381mm – 2515mm) without casters
  • Stand Heights: 22″ – 72″ (208mm – 1829mm) with casters

 

Adjustable Height Stand


Adjustable Height Support Stand

  • Legs include 2 t-slots per side for accessory mounting
  • Provides up to 18″ (457mm) of height adjustment depending upon stand height
  • Stand Widths: 12″ – 48″ (305mm – 1219mm)
  • Stand Heights: 12″ – 96″ (305mm – 2438mm) without casters
  • Stand Heights: 17″ – 77″ (432mm – 1956mm) with casters

Adjustable Height Support Stand (SmartFlex®)
Adjustable Height Support Stand

  • For use when larger adjustment range is needed
  • For use when floor anchoring is not possible
  • Height adjustment is height dependent
  • Top of Belt Heights (middle of adjustment range):
    • Minimum = 18.1″ (406 mm)
    • Maximum = 92.6″ (2,352 mm)
  • Angle adjustable ± 90°
  • All stands are 12″ wide

Quick Adjust Support Stand (SmartFlex®)Adjustable Height Support Stand

  • For use when tool-less adjustment range is needed
  • For use when floor anchoring is not possible
  • Height adjustment is ± 3″
  • Top of Belt Heights (middle of adjustment range):
    • Minimum = 32.6″ (828 mm)
    • Maximum = 74.6″ (1,895 mm)
  • Angle adjustable ± 90°
  • All stands are 12″ wide

 

Single Post Support Stand


Single Post Support Stand

  • Top of stand matches conveyor frame width
  • Legs include 2 t-slots per side for accessory mounting
  • Provides up to 10″ (254mm) of height adjustment
  • Base diameter increases with stand height
  • Stand Widths: 1.75″ – 18″ (44mm – 457mm)
  • Stand Heights: 16″ – 58″ (406mm – 1473mm)

 

 

Pillar Support Stand


Pillar Support Stand

  • Top of stand matches conveyor frame width
  • Legs include 2 t-slots per side for accessory mounting
  • Provides up to 10″ (254mm) of height adjustment
  • ** Must be secured to the floor
  • Stand Widths: 1.75″ – 18″ (44mm – 457mm)
  • Stand Heights: 16″ – 58″ (406mm – 1473mm)

 


Support Post (SmartFlex®)

  • ± 2″ height adjustment
  • Top of Belt Heights:
    • Minimum = 20″ (508 mm)
    • Maximum = 97″ (2,464 mm)
    • Available in 1″ (25mm) height increments
  • (4) Mounting Configurations:
    • Horizontal Mount
    • ± 30° angle mount
    • Gearmotor mount
    • Dual sided mount for 180° curves
  • Equipped with a steel base plate for floor mounting
  • Stand must be lagged to the floor

Low Height Stands


Low Height Stands

  • Legs include 2 t-slots per side for accessory mounting
  • Provides 4″ (102mm) of height adjustment
  • Stand Widths: 12″ – 48″ (305mm – 1219mm)
  • Stand Heights: 6″ – 14″ (152mm – 356mm) without casters
  • Stand Heights: 11″ – 19″ (279mm – 483mm) with casters

 


Stackable Multi Tier Support Stands

Multiple Tier Support Stands

  • Allows conveyors to be stacked within the same stands

 

Return Rollers


Belt Return Rollers Only

  • Provide belt support in areas where the belt might otherwise come in contact with another surface

 

 

 


Return Rollers Narrow Width

  • Provide belt support in areas where the belt might otherwise come in contact with another surface
  • For 2″ to 6″ wide conveyors

 

 

 

 


Cleated Return Roller

  •  Provide belt support in areas where the belt might otherwise come in contact with another surface

 

 

 

Braces & Brackets


Diagonal Braces

  • Provides additional support rigidity, particularly for inclined applications or when casters are used
  • Note that Diagonal Braces are not currently available in our CAD models.

 

 

 


Stand Tie BracketStandard Tie Bracket

  • Used to connect stands from the same or adjacent conveyors for added rigidity and to insure a consistent positioning.

 

 

 



Fine Adjustment KitFine Adjustment Kit

  • Provides fine height adjustment via a threaded bolt
  • For use with Fixed Height Stands only

 

 

 


Common Mount Stands

  • Used for mounting multiple conveyors in parallel to one stand
  • Adds 2” (51 mm) to stand height
  • Adds 2.79” (71 mm) to overall stand width

 

 

 


Horizontal Mounting Bracket (SmartFlex®)

  • For mounting conveyor to horizontal framework or table top
  • Includes a pair of brackets and mounting hardware

Vertical Mounting Bracket (SmartFlex®)

  • For mounting conveyor to vertical framework or surfaces
  • Includes a pair of brackets and mounting hardware