Center Drive

  • AquaPruf - BISSC Certified

Benefits of 7600 AquaPruf Center Drive:

Specifications

  • Load: 20 lbs/square foot of belt (90 kg/m2)
  • Belt Widths: 6” (152 mm) to 60” (1,524 mm)
  • Lengths: 48” (1,219 mm) to 40’ (12.2 m)
  • Belt speed: 328 ft/min maximum (100 m/min)
  • 3.5” (89 mm) diameter drive roller with cast-on Urethane lagging
  • UHMW Wear strip bed plate
  • Continuous TIG welded 304 stainless steel frame
  • #4 Polish on all outside surfaces
  • Bearing material is 400 stainless steel
  • Bearing lubricant is H1 type FDA lubricant
  • FDA approved belting and plastic components

Note: Proper conveyor application, cleaning and sanitation is the responsibility of the end user.
When required Dorner can passivate conveyors or provide most materials in 316 or 316L stainless steel

Features & Benefits

  • Frame is designed with no horizontal surfaces for optimum cleaning.
  • Bearings are mounted in cast stainless steel housings for maximum performance in washdown environments.
  • Center Drives allow additional clearance on ends when needed. Unique tool-less construction for guarding and back bend rollers.
  • Belt tensioning mechanism uses Acme threads for easy cleaning and is externally mounted to the frame with adequate clearances for cleaning.
  • The tool-less tip up pulley allows conveyor end to be lifted easily for quick access to inside of conveyor for cleaning.
  • Conveyor is designed to withstand high pressure (100-1,500 psi) spray and chlorinated solutions.
  • Center drive roller is Cast-On Urethane Lagging for increased load capacity. Spindle has groove for V-guided belts for optimum performance.
  • Frame cut-outs (optional) are available to allow spraying the inside of the conveyor without lifting the belt.
  • Nose bar idler ends (optional) are available in 1/2″, 1″ & 1 7/8″ for small product transfers.
  • Belt lifters (optional) lift belt from wear strips / bed plate by simply pulling an external lever for fast access and effective cleaning.
  • Belt scraper (optional) removes build up and adjusts easily for each application. Features tool-less disassembly/ assembly for cleaning of parts.
  • Solid bed plate (optional) is stainless steel and locates on UHMW strips for delicate / fragile products.

Accessories

Guides
Transfers
Mounting & Hardware
Photo Eye Kits
Drip Pans
Infeed Chute
Angled Hopper

Manuals & Literature

Engineering ManualsPagesFile Size
Sanitary Overview528.34 MB

 

 LiteraturePagesFile Size
 Sanitary Conveyors Line Card 65.97 MB
 Dorner Sanitary Full Spec Rev. D 22425.7 MB
Dorner 7600 Ultimate Full Spec Rev. D 2614 KB
 AquaPruf Accessories Brochure 3 402 KB